Leada M1 Marine cut compound
Nanjing Leada New Material Marine First Step Heavy Cutting Compound is a dedicated heavy-duty abrasive polish for thefirst-stage hull restoration process. Formulated for marine harsh environments with high salt spray and strong UV radiation, it replaces traditional wet/dry sanding to eliminate deep surface defects efficiently. It lays a flat foundation for the second & final finishing polishing steps, acting as the core base product for complete marine surface refinishing systems.
Remove heavy salt corrosion layers & deep yellow oxidation
Eliminate P600-P1000 sanding scratches & orbital swirl marks on gel coat & paint
Erase UV-cracked surface film, water spots & mineral deposits
Cut deep docking scratches & marine algae residue marks
Greatly reduce pre-treatment time without repeated sanding
- Operation Guide
Step 1: Clean & degrease hull surface to remove salt, algae and dirt;
Step 2: Use with wool heavy-cut pad on DA/rotary polisher at medium-high speed;
Step 3: Apply thin compound layer, work section by section until defects are fully removed;
Step 4: Wipe residue clean, then proceed to Step 2 intermediate polishing.
