Industrial Black Paint Buffing Polish Compound

Product Description 

#7000B Mirror Glaze Machine Polish is part of a line of specially designed compounds and polishes to be used on OEM and baked refinish paints to remove sand scratches or to remove swirl marks from previously compounded areas and is designed to produce best results when used with an air or electric buffer equipped with our Finishing pad W9007.

Key Benefits, special features

Mirror finish：Creates a Deep, High Gloss Finish

Versatile：Suitable for all types of coating, MS or HS paints

Silicone Free & wax fee：safe for use in spray shop

Standard process：Step 3

Polishing System I

Polishing System II

Recommended Usage

1.Clean surface thoroughly prior to polishing.

2.Shake the bottle prior to use and apply a small quantity of the product onto the polishing pad (a pea-sized drop is sufficient for an area measuring approx. 40 x 40 cm).

3.Use with the Finish Foam Pad W9007. If using a new or dry pad, apply sufficient polish to prevent the formation of noticeable holograms. 

4.Use either a rotary or an orbital polishing machine and use the cross-coating method. Apply light pressure at the start of the polishing process. Take away the pressure in the final cycles and increase the speed of the polishing machine. 

5.If working on very dry coatings, soak the pad, and spin off excess water,  to prevent dust formation.

6.At first, the polish will seem a little milky and should be worked in until only a slightly transparent/oily film is visible.

7.Once you have finished polishing, remove any residue with our Microfiber Towel, without applying any pressure.

8.Any signs of sanding and use have now been removed. For an exceptionally glossy finish and protection, apply 908 Ultra Seal.