Heavy Cutting Abrasive Polish Paste Compound

Product Description

#1000 Super Duty Rubbing Compound is an aggressive compound that works to remove P1000 sand scratches on all types of paint surfaces. 

#1000 is a highly effective sanding polish for automotive clear coats.

#1000 removes overspray, severe signs of use and sanding marks effectively and reliably. 

The compound maintains a high rate of cut with constant pressure, remains wet on the job and produces little to no mess.  

Key Benefits, special features

Super duty cutting:High quality abrasive grit bigger than 100μm

Versatile:Suitable for all types of coating

Easy to clean up:low dust and minimal workspace pollution

Standard process:Step 1

Polishing System

Recommended Usage

1.Clean surface thoroughly prior to polishing.

2.Shake the bottle prior to use and apply a small quantity of the product onto the polishing pad (a pea-sized drop is sufficient for an area measuring approx. 40 x 40 cm).

3.Use the Cutting Foam Pad in the event of heavy signs of use. If using a new or dry pad, apply sufficient polish to prevent the formation of noticeable holograms. 

4.Use either a rotary or an orbital polishing machine and use the cross-coating method. Apply light pressure at the start of the polishing process. Take away the pressure in the final cycles and increase the speed of the polishing machine. 

5.If working on very dry coatings, soak the pad, and spin off excess water,  to prevent dust formation.

6.At first, the polish will seem a little milky and should be worked in until only a slightly transparent/oily film is visible.

7.Once you have finished polishing, remove any residue with our Microfiber Towel, without applying any pressure.

8.Any signs of sanding and use have now been removed. For an exceptionally glossy finish and protection, apply 908 Ultra Seal.